Setting Additional Controls for Incoming FTP/REXEC Logons

To set additional controls for incoming FTP/REXEC logons, select 1. FTP⁄REXEC Logon (Incoming) from the FTP/REXEC Logon Security screen (STRAUD > 11). The Work with FTP/REXEC Logon Security screen appears:

​                       ​  Work with FTP⁄REXEC Logon Security​                                                                                                          ​  Type options, press Enter.​                                                         ​  1=Select    3=Copy    4=Delete​                    ​  Subset . . . .​   ​                                                                                     ​  Opt​  User Group⁄User*  ​  IP addresses and authorities​                              ​  ​   ​  ​  *PUBLIC           ​  *ALL-2, 1.1.1.193-2                                 ​      ​  ​   ​  ​  %GROUP1           ​  *ALL-2, 1.1.1.105-1                                 ​      ​  ​   ​  ​  AA                ​  *ALL-2                                              ​      ​  ​   ​  ​  AU                ​  *ALL-1                                              ​      ​  ​   ​  ​  CS                ​  *ALL-1                                              ​      ​  ​   ​  ​  RLTOOLS           ​  *ALL-2, 1.1.1.182-1                                 ​      ​  ​   ​  ​  TZION             ​  *ALL-1                                              ​      ​                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ​        Bottom​   ​  F3=Exit     F6=Add new     F8=Print     F12=Cancel​                               ​                                                                                                                                                                   ​

The body of the screen consists of three fields, starting with an Opt field for entering options. Each line refers to a single user or group and its authorities for incoming FTP/REXEC logons.

The User Group/User* field contains the name of a user or group. This can also be a generic* name. The value *PUBLIC refers to all users or groups for whom no more specific information is shown.

The IP addresses and authorities field contains a list of IP address ranges and authorities, shown as the address range, a dash, and a digit 1 through 3 where:

• 1: Accept logon requests
• 2: Reject logon requests
• 3: Require an ALTLOGON connection to connect, as set on the Modify FTP/REXEC Logon User screen, shown at Modifying a User for Incoming FTP/REXEC Logons.

Thus, for example, a value of *ALL-2, 1.1.1.105-1 shows that all FTP/REXEC logon requests are rejected, except those from the IP address 1.1.1.105, which are accepted.

To add information for a user or group, press the F6 key. The Add FTP/REXEC Logon User screen appears, as shown in Adding a User for Incoming FTP/REXEC Logons.

To modify information for a user or group, enter 1 in the Opt field for that user or group. The Modify FTP/REXEC Logon User screen appears, as shown in Modifying a User for Incoming FTP/REXEC Logons.

To copy information from one user or group to another, enter 3 in the Opt field for the original user or group. The Copy FTP/REXEC Logon User screen appears, as shown in Copying a User for Incoming FTP REXEC Logons.

To delete information for a user or a group, enter 4 in the Opt field for the user or group. The Delete FTP/REXEC Logon User screen appears, as shown in Deleting a User for Incoming FTP/REXEC Logons.