Setting Additional Controls for Outgoing IPv6 FTP Connections

To set additional controls for outgoing IPv6 FTP connections, select 6. Client FTP IPv6 (Outgoing) from the FTP/REXEC Logon Security screen (STRAUD > 11).

The Work with Client FTP Security IPv6 screen appears:

​                      ​ Work with Client FTP Security IPv6​                                                                                                         ​ Type options, press Enter.​                                                        ​ 1=Select    3=Copy    4=Delete​                   ​ Subset . . . .​           ​                                                                                        ​ User Group/​                                                                 ​ Opt​ User*​     ​ Outgoing IPv6 addresses and authorities  ​                        ​ ​  ​ ​ *PUBLIC   ​ *ALL-2, 22::-1, 11::-1                                      ​     ​ ​  ​ ​ %#TEST2   ​ *ALL-2                                                      ​     ​ ​  ​ ​ AA1       ​ *ALL-2, 013::-1, 13:93:12::-2, 017:15:13::-1, 1234:0098:0000​ ... ​ ​  ​ ​ ABC       ​ *ALL-1, ::1-2, 13:14:15::-1                                 ​     ​ ​  ​ ​ G*        ​ *ALL-2, 1234:56::-1                                         ​     ​ ​  ​ ​ QQ        ​ *ALL-2, 13:14:15::-1, 13:93:12::-2                          ​     ​ ​  ​ ​ XER       ​ *ALL-2, 55:66:77:88::-1                                     ​     ​ ​  ​ ​ XER2      ​ *ALL-2                                                      ​     ​ ​  ​ ​ ZZZXXX    ​ *ALL-2                                                      ​     ​                                                                                                                                                                                                                                                                                                                                                                                                      ​       Bottom​  ​ F3=Exit​    ​ F6=Add new​    ​ F8=Print​    ​ F12=Cancel​                              ​                                                                                                                                                                  ​

The body of the screen consists of three fields, starting with an Opt field for entering options. Each line refers to a single user or group and its authorities for outgoing Client FTP connections.

The User Group/User* field contains the name of a user or group. This can also be a generic* name. The value *PUBLIC refers to all users or groups for whom no more specific information is shown.

The Outgoing IPv6 addresses and authorities field contains a list of IPv6 address ranges and authorities, shown as the address range, a dash, and either the digit 1 to allow FTP requests or 2 to reject them.

Thus, for example, a value of *ALL-2, 55.66.77.88-1 shows that all outgoing Client IPv6 FTP requests are rejected, except those from the IP address 55.66.77.88, which are allowed.

You can perform the following actions from this screen:

To add information for a user or group, press the F6 key. The Add FTP Client User IPv6 screen appears, as shown in Adding a User for Outgoing IPv6 FTP Connections.

To modify information for a user or group, enter 1 in the Opt field for that user or group. The Modify FTP Client User IPv6 screen appears, as shown in Modifying a User for Outgoing IPv6 FTP Connections.

To copy information from one user or group to another, enter 3 in the Opt field for the original user or group. The Copy FTP Client User screen appears, as shown in Copying a User for Outgoing IPv6 FTP Connections.

To delete information for a user or a group, enter 4 in the Opt field for the user or group. The Delete FTP Client User IPv6 screen appears, as shown in Deleting a User for Outgoing IPv6 FTP Connections.