Modifying Firewall Rules for Data Queues

To modify rules for a data queue showing which users may operate on it, enter 1 in the Opt field for that data queue on the Work with Native AS/400 Data Queue Security screen, as shown in Setting Firewall Rules for Data Queues(STRFW > 4 > 3).

The Modify Native AS/400 Data Queue Security screen appears:

​                    ​  Modify Native AS⁄400 Data Queue Security​                                                                                                       ​  Type information, press Enter.                                                ​                                                                                      ​  Data Queue  . . . .​  ​  ORDERS    ​                                                  ​  Library . . . . . .​  ​  PRODUCTION​                                                ​   ​  Location Group ID .​  ​   ​         ​  1-254​    ​  Access is restricted by location​                                                                                      ​  Define user authority, press Enter.​                                                ​  Y=Yes​                                                                           ​  User*, %Group​  ​  Location​  |----- DATA -----|-- DQ MANAGEMENT  --|​                  ​  Group profile​  ​  Group ID​  | Read     Write |  Create   Delete   |​                 ​   ​  *PUBLIC   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​          ​   ​      ​     ​      ​   ​        ​   ​        ​   ​        ​   ​        ​   ​        ​   ​                                                                          ​       More...​   ​  F3=Exit​   ​  F4=Prompt​    ​  F11=Enable locations ​     ​  F12=Cancel​                      ​                                                                                                                                                                   ​

The read-only Data Queue and Library fields show the users or group to whom these rules apply.

In the Location Group ID field, you can specify a numbered location group from 1 through 254, as shown in . Only members of that group may operate on that data queue.

In each line of the rest of the screen, you can indicate how a specified user or group may operate on the data queue:

User*, %Group, Group profile

The name or generic name of a user or group for whom you are creating these settings. To see a list of possible users or groups, press the F4 key.

Location Group ID

If location groups are enabled, this rule may be restricted to a given numbered location group. To enable location groups, press the F11 key.

DATA Read

If set to Y, the user or group may read the data in the data queue.

DATA Write

If set to Y, the user or group may write data to the data queue.

DQ MANAGEMENT Create

If set to Y, the user or group may create the data queue.

DQ MANAGEMENT Delete

If set to Y, the user or group may delete the data queue.