Network Authentication

To perform activity on remote systems, you must define the user SECURITY2P with the same password on all systems and LPARS with the same password.

  1. Select 72. Network Authentication from the BASE Support menu (STRxx> 89 > 72). The Network Authentication screen appears.
    2. ​                            ​ Network Authentication​                             
                                                                                    
    ​     Type choices, press Enter.                                                    ​ 
                                                                                    
    ​     User for remote work  . . .​ ​ SECURITY2P​       ​ Name          ​                  
    ​     Password  . . . . . . . . .​ ​                                                   
                                                                                  ​      
    ​     Confirm password  . . . . .​ ​                                                   
                                                                                  ​      
    ​     In order to perform activity on remote systems, the user SECURITY2P must be  ​  
    ​     defined on all systems and LPARS with the same password.                     ​  
    ​     SECURITY2P usually should be *DISABLED & LMTCPB(*YES).                       ​  
                                                                                    
    ​     Product options which require this are:                                      ​  
    ​     - referencing a log or a query with the parameter SYSTEM()                   ​  
    ​     - populating definitions, log collection, etc.                               ​  
    ​     - replication of user profiles, passwords  ​ Requires *ENABLED & LMTCPB(*NO)​    
    ​                                                                                  ​  
    ​     Values entered in this screen are NOT preserved in any iSecurity file.       ​  
    ​     They are only used to set the user profile password and to set server        ​  
    ​     authentication entries. Ensure that SysVal QRETSVRSEC is set to 1.           ​  
                                                                                    
    ​     F3=Exit​  ​ F12=Cancel​                                                           
    ​                                                                                    
    ​
  2. Enter the .SECURITY2P user password twice and press Enter.