Send PTF

This option allows you to run a set of commands that will send objects as a PTF. This option is restricted to iSecurity products only. If you need to send PTFs for other products, please contact RazLee Support.

Before you can use this option, you must

Select 74. Send PTF from the BASE Support Menu (STRxx> 89 > 74). The iSecurity Send PTF (RLSNDPTF) screen appears.

​ ​  ​       ​  ​      ​        iSecurity Send PTF (RLSNDPTF)       ​                  
 ​  ​       ​  ​                                                                    
​ Type choices, press Enter.​                                                     
                                                                                
​ System to run for  . . . . . . .​  ​         ​     ​ Name, *CURRENT, *group, *ALL..
​ Objects  . . . . . . . . . . . .​  ​           ​   ​ Name, generic*, *ALL, *NONE   
​     ​           + for more values​  ​           ​   ​                               
​ Library  . . . . . . . . . . . .​  ​           ​   ​ Name, ISECSETUP               
​ Object types . . . . . . . . . .​  ​ *ALL   ​      ​ *ALL, *ALRTBL, *BNDDIR...     
​     ​           + for more values​  ​         ​      ​                               
​ Save file  . . . . . . . . . . .​  ​ *LIB      ​   ​ Name, *LIB                    
​   In library . . . . . . . . . .​    ​ QGPL      ​ ​ Name                          
​ Send SAVF to remote library  . .​  ​ *AUTO     ​   ​ Name, *AUTO (RL+job number)   
​ On remote, backup LIB to SAVF  .​  ​ *NONE     ​   ​ Name, *NONE, *LIB             
​   In library . . . . . . . . . .​    ​           ​ ​ Name                          
​ Restore the objects  . . . . . .​  ​ *NONE     ​   ​ Name, generic*, *NONE, *ALL   
​   Into library . . . . . . . . .​    ​           ​ ​ Name, *LIB, *SAVF, ISECSETUP  
​ Call the installation pgm  . . .​  ​ *NONE     ​   ​ Name, *NONE                   
​   Library  . . . . . . . . . . .​    ​           ​ ​ Name, *LIBL, *RSTLIB          
​                                 ​  ​                                 ​            
                                                                 ​       More...​ 
​ F3=Exit   F4=Prompt   F5=Refresh   F10=Additional parameters   F12=Cancel      
 F13=How to use this display        F24=More keys                              ​ 
                                                                                
​

System to run for

  • Name = The specific name of the system>
  • *CURRENT = The current system
  • *group = All systems in the group>
  • *ALL = All systems on the network

 

Objects

  • Name = A specific object
  • generic* = A group of objects with the same prefix
  • *ALL= All the objects
  • *NONE = No objects need to be extracted, the SAVF has already been prepared

Library

The name of the library that contains the objects

Object types

The object types to be sent

Save file / Library

The name and library of the SAVF to contain the objects.

If you enter *LIB for the file name, the name of the library containing the objects will be used.

If you enter *AUTO as a name for the library, a library will be created with the name of RL<jobnumber>

Remote library for SAVF

The name of the remote library to receive the SAVF to contain the objects. If you enter *AUTO as a name for the library, a library will be created with the name of RL<jobnumber>

Restore objects

The objects to be restored

  • Name = A specific object
  • generic* = A group of objects with the same prefix
  • *ALL= Restore all objects
  • *NONE= Do not restore any objects

Restore to library

The name of the library to receive the restored objects

  • Name = A specific library
  • *LIB = the name of the original library containing the objects will be used. 
  • *SAVF= the same name as the SAVF

Program to run / Library

The name and library of a program to run after the objects have been restored.

Parameters

The parameters for the program that runs after the restore.

Select the correct options and press Enter.