Activating Change Tracking

To activate real time tracking, select option 71. Activation from the main menu. The Activation menu appears.

All the displayed options are part of Audit. For detailed descriptions of these features and how to use them, please see the Audit User Manual.

Figure 3-20. Activation Menu

Real Time Tracking

The Activation menu contains these options for real-time tracking:.

Key	Command	Description
Activation
1	Activate ZAUDIT System	Activate ZAUDIT subsystem. Enable Change Tracker and Real-time tracking must both be enabled in Activation Mode (81,1). To activate Change Tracker in Real Time mode, it is first necessary to enable Changer Tracker and Real time tracking in the Activation Mode screen.
2	De-activate ZAUDIT System	Stop Real Time tracking activity.
5	Work with Active Jobs	Display and manipulate jobs run under the ZAUDIT subsystem.
Auto-Activation at IPL
11	Activate ZAUDIT subsystem at IPL	Activate ZAUDIT at IPL.
12	Do Not Activate ZAUDIT subsystem at IPL	Do not activate ZAUDIT at IPL.
Manual Activation
31	Start Real-Time Auditing	Initiate auditing in real-time mode. ZAUDIT subsystem must be activated before using this option.
32	End Real-Time Auditing	Stop auditing in real-time mode. Only the Real Time active jobs is ended.
35	Set Start of Auditing Time	Set the "starting point" of time to start collecting information.

NOTE: If Real Time is activated for the first time or reactivated after a long inactive period, it is recommended that you only activate during off-peak hours.

Periodic Tracking

These options are available for Periodic tracking on the Activation menu.

Key	Command	Description
Activation
51	Activate Periodic Mode	Initiates a background Periodic job that monitors libraries that were defined as periodic tracking libraries. See Activate Periodic Tracking.
52	De-activate Periodic Mode	De-activate Change Tracker Periodic mode. See Deactivate Periodic Tracking.