Modifying a User for Outgoing IPv6 FTP Connections

To modify information for a user or group for outgoing IPv6 FTP connections, type 1 in the Opt field for that user or group on the Work with Client FTP Security IPv6 screen (STRFW > 11 > 6) as shown in Setting Additional Controls for Outgoing IPv6 FTP Connections, and press Enter.

The Modify FTP Client User IPv6 screen appears:

​                         ​ Modify FTP Client User IPv6​                                                                                                             ​ Type information, press Enter.                                                ​    ​ User  . . . . . . . . .​ ​ XER       ​                                                                                                                                                                                                                                                           ​ Prfx​ 1=Allow​                      ​ Outgoing IPv6 Address​                        ​ Lngh​ 2=Reject​     ​ Text​           ​ *ALL                                          ​    ​  ​ 2​  ​                      ​  ​ 55:66:77:88::                                 ​ 128​  ​ 1​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​                                                                    ​      More...​  ​ F3=Exit​  ​ F4=Prompt​  ​ F11=Alternate view​  ​ F12=Cancel ​                          ​                                                                                                                                                                  ​

The read-only User field shows the name of the user or group.

The body of the screen is made up of lines that can refer to different IPv6 address ranges. To modify the information for the user, you can edit or clear existing lines or add new ones.

Possible values include:

IPv6 Address

The IPv6 address for the range of addresses. In addition to an IPv6 address, you can set this field to *ALL for rules applied to all IPv6 ranges that aren't otherwise specified.

Address prefix length

The length of the IPv6 address prefix. This can be set to from 1-128.

1=Allow 2=Reject

How Firewall responds to requests by the user for outgoing FTP connections to this IPv6 range. Possible values include:

• 1: Accept
• 2: Reject

Text

A free-form text description of the rule.